|  Two
or four asynchronous RS-232, and/ or
 RS-485/422
serial ports - each port’s
electrical
interface is jumper selectable
 Each
port is independently optically
isolated
to 1K VAC peak to peak
Supports
data communication speeds up
to
921.6 Kbps
16C650
UARTs control each port
providing
64 bytes of TxD/RxD FIFO buffers
Each
RS-485 transmitter and receiver
has
a jumper selectable 120 Ohm termination
resistor
and also jumper selectable bias resistors
|
Independent
port configuration with baud rates
from
50 bps to 921.6 Kbps, data bits of 5, 6, 7 or 8:
stop
bits of 1 or 2, and odd, even, or stick parity
Optional
RJ-45 to DB-9 male cables
Easy
installation, comes with comprehensive
manual
and driver software
Supports three
RS-485 modes: Full Duplex,
Half
Duplex with auto TxD echo cancellation,
Multi-drop
Slave |
